Project Settings
Access via MapleCAM > Project Settings.
Stock
| Setting | Description |
|---|---|
| Width (X) | Stock width in mm |
| Height (Y) | Stock depth/length in mm |
| Thickness (Z) | Stock thickness in mm |
Heights
| Setting | Description |
|---|---|
| Safe Z | Height for rapid moves between distant cuts (mm above stock surface) |
| Clearance height | Height for short repositioning moves within an operation |
Material
Select the material from the material library. Material selection affects recommended cutting parameters.
Machine
Select which machine configuration this project targets. This determines available operation types and G-code dialect for export.