Default Tool Presets
MapleCAM ships with a library of pre-configured tools and presets. These are based on tested speeds and feeds for hobby CNC machines.
Tool Categories
- V-Bits — 30, 60, 90 degree V-bits in various sizes
- Ball Nose — ball endmills for 3D finishing
- Tapered Ball — tapered ball endmills for detailed carving
- Flat Endmills — standard flat endmills from 1mm to 1/2 inch
- Compression — compression spiral endmills for clean edges on sheet goods
- Surfacing — large diameter surfacing/spoilboard bits
Preset Values
Preset values vary by tool size and type. Key parameters:
| Parameter | Typical Range | Notes |
|---|---|---|
| Feed rate | 500 - 3000 mm/min | Smaller tools = slower feed |
| Plunge rate | 200 - 1000 mm/min | Typically 30-50% of feed rate |
| Spindle speed | 10,000 - 24,000 RPM | Adjust for material and tool size |
| Stepover | 0.2 - 0.5 (20-50%) | Pocket clearing overlap |
| Depth per pass | 0.5 - 5.0 mm | Depends on tool and material |
Customizing Presets
Open the Tool Library (Tools > Tool Library) to view, edit, or create tool presets. Changes are saved to your user profile and persist across projects.